home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The PC-SIG Library 9
/
The PC-SIG Library on CD ROM - Ninth Edition.iso
/
401_500
/
DISK0499
/
DISK0499.ZIP
/
INSTALL2.BAT
< prev
next >
Wrap
DOS Batch File
|
1989-01-01
|
3KB
|
60 lines
ECHO OFF
CLS
ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
ECHO ▓▓ ▓▓
ECHO ▓▓ This procedure will install ProComm on two floppy diskettes. To ▓▓
ECHO ▓▓ install ProComm on a hard disk use the program HINSTALL. ▓▓
ECHO ▓▓ ▓▓
ECHO ▓▓ Before you begin, be sure you have 2 formatted diskettes labled ▓▓
ECHO ▓▓ PROGRAM and DOCUMENT. If you do not have the diskettes ready, ▓▓
ECHO ▓▓ or you do not wish to proceed with this installation, press ▓▓
ECHO ▓▓ Ctrl-C now. ▓▓
ECHO ▓▓ ▓▓
ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
PAUSE
CLS
ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
ECHO ▓▓ ▓▓
ECHO ▓▓ Be sure the distribution diskette is in drive A:. ▓▓
ECHO ▓▓ ▓▓
ECHO ▓▓ Place the formatted disketted marked PROGRAM in drive B: ▓▓
ECHO ▓▓ ▓▓
ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
PAUSE
CLS
ECHO Creating program diskette ...
a:prcmpgm *.* b: > nul
ECHO Still creating program diskette ...
a:prcmutil *.* b: > nul
ECHO Almost done creating program diskette ...
copy a:license.doc b: > nul
CLS
ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
ECHO ▓▓ ▓▓
ECHO ▓▓ Now remove the PROGRAM diskette from drive B: and replace it with ▓▓
ECHO ▓▓ the DOCUMENT diskette. ▓▓
ECHO ▓▓ ▓▓
ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
PAUSE
CLS
ECHO Creating document diskette ...
a:prcmdoc *.* b: > nul
ECHO Almost done creating document diskette ...
copy a:license.doc b: > nul
CLS
ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
ECHO ▓▓ ▓▓
ECHO ▓▓ All done. To run ProComm, place the PROGRAM diskette that you have ▓▓
ECHO ▓▓ just created in your active drive and type PROCOMM [Enter]. ▓▓
ECHO ▓▓ ▓▓
ECHO ▓▓ To view the documentation, place the DOCUMENT diskette into your ▓▓
ECHO ▓▓ active drive and type TYPE PROCOMM.DOC [Enter]. Press Ctrl-S to ▓▓
ECHO ▓▓ stop the display and any other key to resume it. ▓▓
ECHO ▓▓ ▓▓
ECHO ▓▓ To print the ProComm documentation, place the DOCUMENT diskette ▓▓
ECHO ▓▓ into your active drive and type COPY PROCOMM.DOC PRN [Enter]. ▓▓
ECHO ▓▓ Make sure you have plenty of paper before you start-- the manual ▓▓
ECHO ▓▓ is over 100 pages long. ▓▓
ECHO ▓▓ ▓▓
ECHO ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓